Samsung LNR469DX-XAA - Manual (Page 24)

English- 18
C
O N N E C T I O N S
Connecting CableCARD (LN-R409D, LN-R469D)
You must obtain a CableCARD from a local cable service provider.
TV Rear Panel
1
Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” is
displayed on the screen. If the channel information does not exist, the message “Updating
Channel List” is displayed during channel information configuration.
It could take several minutes to update the channel information depending on your cable
service provider.
2
The pairing information containing a telephone number, CableCARD ID, Host ID, and other
information will be displayed in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
3
When the channel information configuration has finished, the message “Updating
Completed” is displayed, indicating that the channel list is now updated.
4
The Channel list can now be displayed by pressing the CH.LIST button.
RF Cable
CableCARD
Note
• Once the channel list has been updated, only the channels on the channel list can be selected.
• Remove the cable card by carefully pulling it out with your hands since dropping the cable card may
cause damage to it.
01 BN68-00910A-03Eng.qxd 10/20/05 5:34 PM Page 18