Samsung LNR469DX-XAA - Manual (Page 94)

English- 88
F
U N C T I O N
D
E S C R I P T I O N
4
Press the UP/DOWN
buttons to select “Caption
Mode”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select submenu
(Default, CC1~CC4 or
Text1~Text4)
you want, the press the
ENTER
button.
Press the EXIT button
to exit.
• The default is “CC1”.
CC1 : The Primary Synchronous Caption Service.
These are captions in the primary language that must be
in sync with the sound, preferably matched to a specific frame.
CC2 : The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment
information carried in the program.
CC3 : Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second
language captions.
CC4 : Special Non-Synchronous Use Captions.
Similar to CC2.
Text1: First Text Service. This may be various non-program related data.
Text2: Second Text Service. Additional data, usually not program related.
Text3/Text4: Third and Fourth Text Services. These data channels should be
used only if Text1 and Text2 are not sufficient.
Note
• The Caption feature doesn’t work in COMPONENT(480p, 720p,
1080i), HDMI modes.
• The availability of captions depends on the program being
broadcast.
02 BN68-00910A-03Eng.qxd 10/20/05 3:37 PM Page 88