Samsung LNR469DX-XAA - Manual (Page 27)

English- 21
O
P E R AT I O N
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed
automatically and subsequently:
1
Press the POWER button
on the remote control.
The message
“Menu language, Channels
and Time will be set.”
is displayed. Press the
ENTER
button, then
“Select the language of the
OSD” menu is automatically
displayed.
2
Press the ENTER button
to enter the language.
Press the UP/DOWN
buttons to select language,
then the ENTER
button.
“Select the antennas to
memorize.” menu is
automatically displayed.
3
Press the UP/DOWN
buttons to memorize the
channels of the selected
connection.
Press the ENTER button
to select “Start”.
• If the antenna is connected
to ANT 1(CABLE),
select “CABLE” and if it is
connected to ANT 2
(AIR), select “AIR”.
• If both ANT 1 and ANT 2
are connected, select
the “Air + Cable”.
• If the CableCARD is
inserted into the
“CableCARD” slot on the
rear panel, “Cable” and
“Air+Cable” are not
available.
Some OSD can be different depending on the model.
01 BN68-00910A-03Eng.qxd 10/20/05 3:29 PM Page 21