Samsung LNR469DX-XAA - Manual (Page 69)

English- 63
Labeling Channels
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “Name”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select the
channel to be assigned to
a new name, then press the
ENTER
button.
Press the UP/DOWN
buttons to select a letter,
a number or a blank
(Results in this sequence:
A...Z, 0...9, +, -, •, /, blank).
Press the RIGHT
button
to switch to the next field,
which will be selected.
Select a second letter or
digit by pressing the
UP/DOWN
buttons,
as above. Repeat the
process to select the last
three digits. When you have
finished, press the
ENTER
button to assign
the new name.
To erase the assigned new
name, select "Clear" by
pressing the
or button,
then press the ENTER
button.
Press the EXIT button to
exit.
• The names of digital broadcasting channels are automatically assigned and thus cannot be
assigned by users.
• When you use cable card to watch cable broadcasting, it might take some time for a
channel name to be displayed due to data-receiving time.
C
H A N N E L
C
O N T R O L
01 BN68-00910A-03Eng.qxd 10/20/05 3:32 PM Page 63