ABL electronic PIC Microcontrollers PIC16 - Manual (Page 181)

MikroElektronika: Development tools - Books - Compilers
173
page
mikroC - C Compiler for Microchip PIC microcontrollers
mikroC
making it simple...
Prototype void Eeprom_Write(char address, char data);
Description Writes data to the specified address. Parameter
address
is of byte type, which means it
can address only 256 locations. For PIC18 micros with more EEPROM data locations, it
is programmer’s responsibility to set SFR EEADRH register appropriately.
Be aware that all interrupts will be disabled during execution of EEPROM_Write rou-
tine (GIE bit of INTCON register will be cleared). Routine will set this bit on exit.
Requires Requires EEPROM module.
Ensure minimum 20ms delay between successive use of routines
Eeprom_Write
and
Eeprom_Read
. Although PIC will write the correct value,
Eeprom_Read
might return
an undefined result.
Example Eeprom_Write(0x32);
Eeprom_Read
unsigned short i = 0, j = 0;
void main() {
PORTB = 0;
TRISB = 0;
j = 4;
for (i = 0; i < 20u; i++)
Eeprom_Write(i, j++);
for (i = 0; i < 20u; i++) {
PORTB = Eeprom_Read(i);
Delay_ms(500);
}
}//~!
Library Example