ABL electronic PIC Microcontrollers PIC16 - Manual (Page 228)

mikroC - C Compiler for Microchip PIC microcontrollers
mikroC
making it simple...
220
MikroElektronika: Development tools - Books - Compilers
page
Prototype void Man_Receive_Config(char *port, char rxpin);
Description The function prepares PIC for receiving signal. You need to specify the
port
and
rxpin
(0–7) of input signal. In case of multiple errors on reception, you should call
Man_Receive_Init
once again to enable synchronization.
Example
Man_Receive_Config(&PORTD, 6);
Man_Receive_Config
Prototype void Man_Receive_Init(char *port);
Description The function prepares PIC for receiving signal. You need to specify the
port
;
rxpin
is
pin 6 by default. In case of multiple errors on reception, you should call
Man_Receive_Init
once again to enable synchronization.
Example Man_Receive_Init(&PORTD);
Man_Receive_Init
Prototype void Man_Receive(char *error);
Returns Returns one byte from signal.
Description Function extracts one byte from signal. If signal format does not match the expected,
error
flag will be set to 255.
Requires To use this function, you must first prepare the PIC for receiving. See
Man_Receive_Config
or
Man_Receive_Init
.
Example temp = Man_Receive(error);
if (error) { ... /* error handling */ }
Man_Receive