ABL electronic PIC Microcontrollers PIC16 - Manual (Page 272)

mikroC provides a Sound Library which allows you to use sound signalization in
your applications. You need a simple piezo speaker (or other hardware) on desig-
nated port.
Sound_Init
Sound_Play
mikroC - C Compiler for Microchip PIC microcontrollers
mikroC
making it simple...
264
MikroElektronika: Development tools - Books - Compilers
page
Sound Library
Library Routines
Prototype void Sound_Init(char *port, char pin);
Description Prepares hardware for output at specified port and pin. Parameter pin needs to be within
range 0–7.
Example Sound_Init(PORTB, 2); // Initialize sound on RB2
Sound_Init
Prototype void Sound_Play(char period_div_10, unsigned num_of_periods);
Description Plays the sound at the specified port and pin (see Sound_Init). Parameter period_div_10
is a sound period given in MCU cycles divided by ten, and generated sound lasts for a
specified number of periods (num_of_periods).
Requires To hear the sound, you need a piezo speaker (or other hardware) on designated port.
Also, you must call
Sound_Init
to prepare hardware for output.
Example To play sound of 1KHz: T = 1/f = 1ms = 1000 cycles @ 4MHz. This gives us our first
parameter: 1000/10 = 100. Play 150 periods like this:
Sound_Play(100, 150);
Sound_Play