ABL electronic PIC Microcontrollers PIC16 - Manual (Page 274)

SPI module is available with a number of PIC MCU models. mikroC provides a
library for initializing Slave mode and comfortable work with Master mode. PIC
can easily communicate with other devices via SPI: A/D converters, D/A convert-
ers, MAX7219, LTC1290, etc. You need PIC MCU with hardware integrated SPI
(for example, PIC16F877).
Note: This library supports module on PORTB or PORTC, and will not work with
modules on other ports. Examples for PICmicros with module on other ports can
be found in your mikroC installation folder, subfolder “Examples”.
Spi_Init
Spi_Init_Advanced
Spi_Read
Spi_Write
mikroC - C Compiler for Microchip PIC microcontrollers
mikroC
making it simple...
266
MikroElektronika: Development tools - Books - Compilers
page
SPI Library
Library Routines
Prototype
void Spi_Init(void);
Description Configures and initializes SPI with default settings.
SPI_Init_Advanced
or
SPI_Init
needs to be called before using other functions from SPI Library.
Default settings are: Master mode, clock Fosc/4, clock idle state low, data transmitted on
low to high edge, and input data sampled at the middle of interval.
For custom configuration, use
Spi_Init_Advanced
.
Requires You need PIC MCU with hardware integrated SPI.
Example
Spi_Init();
Spi_Init