Samsung HW-H750-ZA - Manual (Page 10)

10
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
TREBLE BASS
Press to select Treble or Bass. Then, use the #,$ button to
adjust the Treble or Bass volume from -3 to +3.
DIMMER/Anynet+
DIMMER : Press the DIMMER/Anynet+ button to control the
brightness of the VACUUM TUBE AMP. DIMMER does not function
for 30 seconds after you turn on the product for the very first time.
Anynet+ : Press and hold the DIMMER/Anynet+ button for more
than 5 seconds to turn the Anynet+ function and AUTO POWER
LINK function on or off. The Anynet+ function lets you control the
Soundbar with the remote from an Anynet+ compatible Samsung
TV. The Soundbar must be connected to the TV via an HDMI cable.
See page 25 for details about AUTO POWER LINK.
REPEAT
Press to set the REPEAT function during music playback from a
USB device.
REPEAT OFF : Cancels Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order. (A track that
has already been played may be played again.)
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOURCE
Press to select a source connected to the Soundbar.
Skip Forward
If there is more than one file on the device you are playing, and you
press the $ button, the next file is selected.
AUDIO SYNC
If the Soundbar is connected to a digital TV and the video appears
out of sync with the audio, press the AUDIO SYNC buttons to
sync the audio with the video.
Use the #,$ buttons to set the audio delay between 0 ms and
300 ms. In USB mode, TV mode, and BT mode, the Audio Sync
function may not work.
Press and hold the AUDIO SYNC button on the remote for over
7 seconds to activate Wi-Fi SETUP function.