Samsung HW-H750-ZA - Manual (Page 20)

20
FUNCTIONS
● If asked for PIN code when connecting a Bluetooth device, enter <0000>.
● Only one Bluetooth device can be paired at a time.
● The Bluetooth connection will be terminated when you turn the Soundbar off.
● The Soundbar may not perform Bluetooth search or connection correctly under
the following circumstances:
- If there is a strong electrical field around the Soundbar.
- If several Bluetooth devices are simultaneously paired with the Soundbar.
- If the Bluetooth device is turned off, not in place, or malfunctions.
- Note that such devices as microwave ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use the same frequency range as the
Bluetooth device, which can cause electric interference.
● The Soundbar supports SBC data (44.1kHz, 48kHz).
● Connect only to a Bluetooth device that supports the A2DP (AV) function.
● You cannot connect the Soundbar to a Bluetooth device that supports only the
HF (Hands Free) function.
+ To disconnect the Bluetooth device from the Soundbar
You can disconnect the Bluetooth device from the Soundbar. For instructions, see the
Bluetooth device's user manual.
● The Soundbar will be disconnected.
● When the Soundbar is disconnected from the Bluetooth device, the Soundbar will
display BT DISCONNECTED on the front display.
+ To disconnect the Soundbar from the Bluetooth device
Press the (SOURCE) button on the remote control or the ( ) button on the
product's front panel to switch from BT to another mode or turn off the Soundbar.
● The connected Bluetooth device will wait a certain amount of time for a response from
the Soundbar before terminating the connection. (Disconnection time may differ,
depending on the Bluetooth device)
● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance
between the Soundbar and the Bluetooth device exceeds 16.25 ft. (5 m).
● The Soundbar automatically turns off after 15 minutes in the Ready state.