Samsung HW-H750-ZA - Manual (Page 37)

37
ENG
MULTIROOM LINK
ADDING A HUB
An Soundbar and a HUB may not pair successfullly if the
Soundbar and HUB are too far apart or are on different floors.
In such cases, you can link two HUB's together by setting the
second HUB to Repeater mode. The additional HUB amplifies
the signal and lets you pair the Soundbar to the closest HUB.
1. Set the HUB that is connected to the wireless router to
Pairing mode by pressing its SPK ADD button for 1 second.
2. Plug in the new HUB you are using as an extender, and
then press its SPK ADD button for 10 seconds.
3. The newly added HUB’s LED indicators turn off and on,
and it switches to Repeater mode.
4. Once the connection between the two HUB’s has been
established, the added HUB’s ( ) indicator stops
blinking.
● If your smart device is not connected to the wireless router with a Wi-Fi
connection, the Soundbar will not appear on the Samsung Multiroom app.
● Place the HUB that is in Repeater mode in an appropriate location between the
Soundbar and the HUB that is connected to the wireless router.
● You can set only one HUB to Repeater mode.
● HUB may not be commercially available depending on country or region.
To purchase, contact the distributor or Samsung Service Center.
RELOCATING THE SOUNDBAR
When relocating your Soundbar, refer to the below table.
Wireless router
HUB
If you want to connect
your Soundbar to the
current wireless router.
If you want to connect your
Soundbar to a different
wireless router.
Without a HUB
Turn off the Soundbar,
relocate it and then turn it
on.
Turn off the Soundbar, relocate it,
then establish the new connection
as described in the installation
instructions on page 30~36.
With a HUB
Connect a LAN cable between the
HUB and the new wireless router,
turn on the HUB, and follow
"Adding an extra Soundbar to a
HUB that is connected to an
Soundbar" (page 33) step.
Soundbar
HUB
Used as a
extender