Samsung ES-NX10ZZSEB - Manual (Page 44)

44
Using the bulb exposure
By using the bulb exposure, you can set the shutter
speed as long as you want.
1
Rotate the Mode dial to M.
2
Rotate the dial and set the shutter speed
to Bulb.
• Bulb exposure indication appears next to
the shutter speed of 30"(seconds).
3
To adjust the aperture value, press and
hold the [EV] while rotating the dial.
4
Align your subject in the frame and half-
press [Shutter] to focus.
5
Press [Shutter] to take a photo.
• The exposure time continues until you
finish holding the [Shutter]. Press and
hold the [Shutter] for desired time. As
soon as you finish holding the [Shutter],
the shooting is complete.
Using the Aperture Priority, Shutter Priority, or Manual mode
To improve image stability in the Bulb Exposure
mode, we recommend you use a reliable tripod or
shutter release (purchased separately).
With long exposures, the time the camera takes
to save images gets longer as well. This is not a
problem with the product and you do not need to
replace the battery.
Before using Bulb Exposure to take long exposures,
we recommend you fully charging the battery.
When you use Bulb Exposure to take long exposures,
visual noise can occur. To control visual noise, we
recommend you turn the Noise Reduction function
on. The Noise Reduction function operates when the
shutter exposure exceeds 1 seconds.
When you use Bulb Exposure, the Successive
Shooting function is unavailable.
When you use Bulb Exposure, you can not set the
ISO Speed to AUTO.
•
•
•
•
•
•
14 M
SF
RGB
ISO
0173 Bulb F3.5 00'00''
OIS