Samsung ES-NX10ZZSEB - Manual (Page 55)

55
Using the flash popup button
The flash operates when you pop-up the built-in flash
by pressing the flash button. When the flash is closed,
it will not burst out the light and the
, , ,
and modes support automatic popup and flash light.
1
In the Shooting mode, press [ ].
2
Align your subject in the frame and half-
press [Shutter] to focus.
3
Press [Shutter] to take a photo.
• Even if you have opened the flash using
the 'Flash' button, the flash will not work if
you have the Flash Option in the menu set
to Off.
Setting the flash option
If a picture is taken in a dark place, the picture may
appear to be dark since the light source is not sufficient.
Press [
] to pop up the flash.
1
In the Shooting mode, press [MENU].
2
Select Shooting 2 ( 2 ) → Flash →
an option.
Off The flash light doesn't operate.
SMART
Smart Flash
The camera automatically adjusts the brightness of the
flash according to the amount of light in the surrounding
environment.
Auto The flash light operates automatically in the dark place.
Auto+Red
The flash light operates automatically and prevents the
red-eye effect.
Fill in
• The flash operates whenever you take a picture.
• The brightness of the flash is automatically controlled.
Fill-in Red
The flash operates whenever you take a picture and
prevents the red-eye effect.
1st Curtain The flash operates immediately after the shutter opens.
2nd Curtain The flash operates just before the shutter closes.
• You can take a better picture if the subject is
located within the operational range of the flash.
(Refer to the Guide Number in “Specification,”)
• You can set the auto flash option for external
flashes on the NX-series models only.
• The flash options available differ, depending on
the shooting modes.
Flash button
Taking a picture in a dark place
The function can be set directly by pressing [Fn] in the shooting mode.