Samsung ES-NX10ZZSEB - Manual (Page 57)

57
Adjusting the amount of flash light
When setting a flash option, you can adjust the
brightness of the flash.
1
In the Shooting mode, press [MENU].
2
Select Shooting 2 ( 2 ) → Flash.
3
Press the [Fn] button after selecting a
desired item.
4
Adjust the brightness of the fl ash by
rotating the dial or pressing [ W / X].
• You can adjust flash brightness by ±2
levels.
Taking a picture in a dark place
• If the subject is too close, the ISO sensitivity is
high, or the exposure value is too large or small,
the adjustment effect will be reduced.
• The Flash Brightness Adjustment function is not
available in some shooting modes.
• If an external flash unit has a flash control
function, the light control value of the external
flash is applied when you connect it to the
camera.
• If the distance from the subject is quite close
when taking images by using the built-in flash,
part of the images may appear dark as the lens
is interfered with the flash light. Please check
the distance between camera and subject when
taking pictures. The distance interfered with
flash light may vary by the type of lens in use.
• If you've installed a lens hood, the hood can
block light from the built-in flash. Please remove
the lens hood when using the built-in flash.
MENU
1
Display
the level of
flash light
adjustment
-2
-1 +1
+2
0
Flash Exposure Value
Reset Back