Using the cold water dispenser, Maintaining the ice bucket, Making ice – Samsung RF34H9960S4-AA User Manual

Page 36

Advertising
background image

English - 36

USING THE COLD WATER
DISPENSER

PUSH THE APPROPRIATE ICE TYPE
BUTTON TO SELECT WHAT YOU
WANT DISPENSED.

Using the ice lever ( 1 )

Push the Ice lever dispenser ( 1 ) gently with your
glass. Ice will be released from the dispenser.
You can choose the type of ice by pushing the
cubed or crushed button fi rst.

NO ICE

NO ICE

Select this if you want

Select this if you want

to turn ice maker off

to turn ice maker off

Using the Water lever ( 2 )

Push the Water lever dispenser
( 2 ) gently with your glass.
Water will be released from the
dispenser.

1

1

2

2

• If you push the water and Ice lever at about

the same time, the dispenser operates only
the option you actually selected or pushed
fi rst.

• Please wait 1 second before removing

the glass after dispensing water to
prevent spills. Do not pull out the
dispenser lever after dispensing ice or
water. It comes back automatically.

Using the Ice & Water Dispenser together

To get Ice and water, push the Ice lever ( 1 ) fi rst
for ice, then move your glass down and press the
water dispenser lever ( 2 ) for water.

MAINTAINING THE ICE BUCKET

• To clean the ice bin/bucket, wash with a mild

detergent, rinse well, and dry thoroughly.
Do not use harsh or abrasive cleaners or
solvents.

• Ice is made in cubes. When you select

“Crushed”, the ice maker grinds the ice cubes
into crushed ice.

• When you select Cubed Ice after using the

Crushed Ice mode, a small amount of residual
crushed ice might be produced.

• The ice cubes generated by the rapid ice

making process will look white, which indicates
they are generated normally.

• If ice doesn’t come out, pull out the ice bucket

and press the Test button located on the right
side of ice maker. See the illustration under
Making Ice below.

• Do not press the Test button continuously if

the tray is fi lled with ice or water. Water may
overfl ow or ice may jam the bucket.

MAKING ICE

• To fi ll the ice bucket to maximum capacity after

installation, follow these steps:

1. Allow your refrigerator to operate and cool

down for 24 hours (or 1 full day).

-

Waiting 24 hours will allow your ice maker to
cool properly.

2. Dispense 4 to 6 ice cubes into a glass.
3. After another 8, and then 16 hours, dispense a

full glass of ice.

• To test the ice maker, press the Test button

on the ice maker. You will hear the refrigerator
chime (ding-dong). When the chime sounds,
release the Test button.

• The chime sounds automatically again to let

you know the ice maker is working well.

DA68-03013A-05.indb 36

DA68-03013A-05.indb 36

2014. 5. 28.

10:08

2014. 5. 28.

10:08

Advertising
This manual is related to the following products: