AMX Novara 1000 Series - Manual (Page 62)

AMX NOVARA DCS1000 Device Configuration Software
56 Novara ControlPads & KeyPads
4. When the IR parameters have been set, click Add to Script to add this IR command to the script
(FIG. 40).
AMX IR Libraries
To view the IR libraries, open the IR window then click the View IR Library button to open the AMX IR
Library dialog (FIG. 41).
The options in this dialog allow you to create a new IR Device Library, as well as Edit or Add Functions to
existing IR Libraries.
Loading an Existing IR Library
1. Click File > Open. This invokes the Open dialog.
2. Select an IR Library (Data) file.
When hard-wiring to a device the carrier may have to be turned off, refer to
Manufacturers instructions, otherwise carrier must be left On.
FIG. 40 Adding an IR Command to the Script
FIG. 41 AMX IR Library dialog
Edit options window
Device Selection Function Selection
Close this dialog
and return to the
Main screen
NOVARA IR Library (Data) files use the file extension *PLR.