AMX Novara 1000 Series User Manual
Page 67
AMX NOVARA DCS1000 Device Configuration Software
61
Novara ControlPads & KeyPads
Creating New IR Libraries Using an IRIS IR/Serial Data Capture Device
To create new libraries using a manufacturers handset and an AMX IRIS Unit (FIG. 50):
1.
In the AMX IR Libraries dialog, select File > New.
2.
In the Save As dialog, enter a name for the Library File and click Save.
3.
In the AMX IR Libraries dialog, click Add New Device to invoke the Add New Device fields (FIG. 30):
4.
Enter the Device Make (model) and Description, and click Save Device.
5.
Click on Learn new function to invoke the Learn Function fields (FIG. 52):
6.
Connect the IRIS to your PC:
a.
Connect an RS-232 cable to the DB-9 connector on the IRIS unit and an RS-232 port on your PC.
b.
Set the baud rate in the IRIS unit to match the PC baud rate.
The IRIS (FG5448) is a stand-alone, self-contained unit used to capture IR or wired
function signals from a hand controller. Once captured and verified, the control
functions are sent to a PC operating the IRLIB program. For details on using the IRIS,
refer to the IRIS Operation/Reference Guide (available at www.amx.com).
FIG. 50
AMX IRIS IR Capture Unit
FIG. 51
AMX IR Library dialog - Add New Device fields
FIG. 52
AMX IR Library dialog - Learn New Functions fields