AVerMedia Technologies EYES PRO MP3000 - Manual (Page 48)

AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
87
1. Select Display Mode
When you enter this page, first select the display mode by clicking
(1 Channel), (4 Channels), (9 Channels), and
(16 Channels). You can also click these buttons to switch
display mode during playback. To switch to a specific camera, click
… to play videos of that camera.
2. Audio Playback
If you also want to play audio files, click to enable audio
playback.
3. Select Files to Play
Next you need to choose files that you want to playback.
A. Select Time
Click to select the date & time for
the start time (on the left) and end time (on the right)
respectively. The system will instantly show video data that
has motion (default event) detected during the specified time
frame in the event indicator below.
AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
88
B. Play
Click the Playback button to play files from start to
end. You can also manually drag the slide bar in the directly to
the frame you want to play and click the Playback
button. The lines in the event indicator represent time points
where the specified event has taken place.
4. Playback Control
Once you start to playback videos, you can use the following
function buttons during playback.
5. Playback Speed Control
You can click the up and down buttons from to adjust the
playback speed. You can choose from 8, 4, 2, 1, 1/2, 1/4, and 1/8
times of the normal speed.
6. Image Quality
Click to adjust the image quality. You can adjust the
brightness, contrast, color and saturation.
Move to Start
Pause Previous Frame
Reverse Playback
Next Frame
Move to End
Playback