Alpine CDM-7858R - Manual (Page 15)

13
-EN
CD Player Operation
Normal Play and Pause
1
Insert a CD. The CD player begins playback
from the first track on the disc.
The display shows the track number and
elapsed time of the track being played. When
the last track is played back the player returns to
the first track and begins playback from that
point.
2
If a disc is already loaded in the CD player, press
the SOURCE button to select the CD mode.
3
Press the - / J button to start CD play.
4
Press the - / J button to temporarily stop CD
playback.
To resume playback, press the
- / J button
again.
- / J
SOURCE
c
Inserting/Ejecting Disc
1
Insert a CD half way into the slot with the label
side facing up. The player automatically draws
the disc into the disc compartment.
The Disc indicator appears to show that a disc
is loaded.
NOTE
Three-inch (8cm) CD's can be used.
2
Press the c button when you want to eject the
CD.
NOTES
•
If the CD is not removed for several seconds after it
has been ejected, the player automatically draws the
CD into the compartment to protect the CD.
•
Only compact discs showing the marks below can be
used.
•
We cannot fully guarantee the playback of CD-R
(CD-Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.