Alpine CDM-7858R - Manual (Page 16)

14
-EN
M.I.X. F
SOURCE - / J TITLE
SCAN
Preset buttons (1 through 6)
CD Player Operation
Music Sensor (Skip)
1
Momentarily press the g DN button once
during CD play to return to the beginning of the
current track. If you wish to access a track
further back, repeatedly press until you reach the
desired track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
a track further ahead, press repeatedly until the
desired track is reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1
Press and hold the g DN or f UP button
to quickly move backward or forward until you
reach the desired section of the track.
Repeat Play
1
Press the REPEAT button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the REPEAT button again to deactivate
the repeat play.
NOTE
If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the
disc selected.
NOTE
In case a 6-disc CD changer is connected:
Press the F button so that the F (Function) indicator
lights up, then go to step 1.
Press the F button to return to the normal mode.
The F indicator light goes out.
M.I.X. (Random Play)
1
Press the M.I.X. button in the play or pause
mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence. After all the tracks on the disc have
been played back once, the player will begin a
new random sequence play until the M.I.X.
mode is cancelled.
To cancel M.I.X. play, press the M.I.X. button again.
NOTE
In case a 6-disc CD changer is connected:
Press the F button so that the F (Function) indicator
lights up, then go to step 1.
Press the F button to return to the normal mode.
The F indicator light goes out.
REPEAT g DN f UP
RPT RPT ALL (OFF)
→ → →