Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 156)

Page 156
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Parameters
•
ipv6_addr — Valid IPv6 address to map to the specified MAC address.
• hw_addr — Valid MAC address to map to the specified IPv6 address.
• ethernet interface-number — Valid port number.
• vlan vlan-id — Valid VLAN number.
• port-channel number — Valid port channel number.
Default Configuration
This command has no default setting.
Command Mode
Global Configuration mode.
User Guidelines
•
The ipv6 neighbor command is similar to the arp (global) command.
• If an entry for the specified IPv6 address already exists in the neighbor discovery cache, learned through the
IPv6 neighbor discovery process, the entry is automatically converted to a static entry.
• A new static neighbor entry with a global address can only be configured if a manually configured subnet
already exists in the device.
• Use the show ipv6 neighbors command to view static entries in the IPv6 neighbor discovery cache.
Example
The following example configures a static entry in the IPv6 neighbor discovery cache.
show ipv6 neighbors
The show ipv6 neighbors Privileged EXEC mode command displays IPv6 neighbor discovery cache information.
Syntax
show ipv6 neighbors {static | dynamic}[ipv6-address ipv6-address] [mac-address mac-address] [ethernet
interface-number | vlan vlan-id | port-channel number]
Parameters
•
static — Displays static neighbor discovery cashe entries.
• dynamic — Displays dynamic neighbor discovery cashe entries.
• ipv6-address — Displays the neighbor discovery cache information entry of a specific IPv6 address.
• mac-address — Displays the neighbor discovery cache information entry of a specific MAC address.
• ethernet interface-number — Displays the neighbor discovery cache information entry of a specific Ethernet
port interface.
• vlan vlan-id — Displays the neighbor discovery cache information entry of a specific VLAN.
• port-channel number — Displays the neighbor discovery cache information entry of a specific Port-channel
number interface.
console(config)# ipv6 neighbor fe80::33 00:11:22:33:44:55 ethernet g5