Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 254)

Page 254
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Example
The following example displays the SNMP communications status.
The following table describes significant fields shown above.
console# show snmp
Community-
String
Community-
Access
View name IP
address
---------- ---------- --------- --------
public read only user-view All
private read write Default 172.16.1.1
private su DefaultSuper 172.17.1.1
Community-string Group name IP address
---------------- ---------- ----------
public user-group all
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP
Port
Filter
Name
TO
Sec
Retries
-------------- ----- --------- ------- ---- ------ --- -------
192.122.173.42 Trap public 2 162 15 3
192.122.173.42 Inform public 2 162 15 3
Version 3 notifications
Target Address Type Username Security
Level
UDP
Port
Filter
Name
TO
Sec
Retries
-------------- ----- --------- ------- ---- ------ --- -------
192.122.173.42 Inform Bob Priv 162 15 3
System Contact: Robert
System Location: Marketing
Field Description
Community-string Community access string to permit access to the SNMP protocol.
Community-access Type of access - read-only, read-write, super access