Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 92)

Page 92
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the contents of the running configuration file.
show bootvar
The show bootvar Privileged EXEC mode command displays the active system image file that is loaded by the
device at startup.
Syntax
show bootvar [unit unit]
Parameters
•
unit — Specifies the unit number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
console# show startup-config
software version 1.1
hostname device
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet 1/g2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000