Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 336)

Page 336
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Chapter 33.User Interface Commands
do
The do command executes an EXEC-level command from Global Configuration mode or any configuration
submode.
Syntax
do command
Parameters
•
command — Specifies the EXEC-level command to execute.
Default Configuration
This command has no default configuration.
Command Mode
All Configuration modes
User Guidelines
There are no user guidelines for this command.
Example
The following example executes the show vlan Privileged EXEC mode command from Global Configuration
mode.
Console(config)# do show vlan
VLAN
----------------
1
10
11
20
21
30
31
91
3978
Name
----------------
default
VLAN0010
VLAN0011
VLAN0020
VLAN0021
VLAN0030
VLAN0031
VLAN0011
Guest VLAN
Ports
----------------
1/g1-2
2/g1-4
1/g3-4
1/g1-2
1/g3-4
1/g1-2
1/g17
Type
----------------
Other
dynamic
static
static
static
static
static
static
static
Authorization
----------------
Required
Required
Required
Required
Required
Required
Required
Not Required
Guest