Lldp run, Lldp run 8 – Allied Telesis AT-9000 Series User Manual
Page 1096
Advertising
Chapter 68: LLDP and LLDP-MED Commands
1068
LLDP RUN
Syntax
lldp run
Parameters
None
Mode
Global Configuration mode
Description
Use this command to activate LLDP on the switch. Once you have
activated LLDP, the switch begins to transmit and accept advertisements
on its ports. To deactivate LLDP, refer to “NO LLDP RUN” on page 1086.
Confirmation Command
Example
awplus> enable
awplus# configure terminal
awplus(config)# lldp run
Advertising