Allied Telesis AT-9000 Series - Manual (Page 921)

AT-9000 Switch Command Line User’s Guide
893
“NO AUTH-MAC ENABLE” on
page 921 Port Interface Deactivates MAC address-based
authentication on authenticator ports.
“NO DOT1X PORT-CONTROL” on
page 922 Port Interface Removes ports from the authenticator
role.
“SHOW AUTH-MAC INTERFACE” on
page 923 Privileged Exec Displays the parameter settings of
authenticator ports.
“SHOW AUTH-MAC
SESSIONSTATISTICS INTERFACE”
on page 924 Privileged Exec Displays EAP packet statistics of
authenticator ports.
“SHOW AUTH-MAC STATISTICS
INTERFACE” on page 925 Privileged Exec Displays EAP packet statistics on
authenticator ports.
“SHOW AUTH-MAC SUPPLICANT
INTERFACE” on page 926 Privileged Exec Displays the number and types of
supplicants on authenticator ports.
“SHOW DOT1X” on page 927 Privileged Exec Displays whether 802.1x port-based
network access control is enabled or
disabled on the switch and the IP
address of the RADIUS server.
“SHOW DOT1X INTERFACE” on
page 928 Privileged Exec Displays the parameter settings of
authenticator ports.
“SHOW DOT1X STATISTICS
INTERFACE” on page 929 Privileged Exec Displays EAP packet statistics on
authenticator ports.
“SHOW DOT1X SUPPLICANT
INTERFACE” on page 930 Privileged Exec Displays the number and types of
supplicants on authenticator ports.
Table 87. 802.1x Port-based Network Access Control Commands (Continued)
Command Mode Description