Allied Telesis AT-9000 Series - Manual (Page 125)

AT-9000 Switch Command Line User’s Guide
97
Both the first_line_id and the last_line_id parameters have value of 0 to 9.
You can specify one VTY line or a range of VTY lines. This example sets
the management session timer to 8 minutes on VTY line 2:
awplus> enable
awplus# configure terminal
awplus(config)# line vty 2
awplus(config-line)# exec-timeout 8
This example sets the management session timer to 3 minutes for all VTY
lines:
awplus> enable
awplus# configure terminal
awplus(config)# line vty 0 9
awplus(config-line)# exec-timeout 3