Allied Telesis AT-9000 Series - Manual (Page 583)

AT-9000 Switch Command Line User’s Guide
555
SHOW ETHERCHANNEL SUMMARY
Syntax
show etherchannel summary
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the states of the member ports of the
aggregators. Figure 106 illustrates the information.
Figure 106. SHOW ETHERCHANNEL SUMMARY Command
Example
This example displays the states of the aggregator’s member ports:
awplus# show etherchannel summary
Aggregator #2 .... po2
Admin Key: 0xff01 - Oper Key: 0x0101
Link: Port1.0.2 sync
Link: Port1.0.3 sync
Link: Port1.0.4 sync
Link: Port1.0.5 sync
Link: Port1.0.6 sync
Aggregator #21 .... po21
Admin Key: 0xff16 - Oper Key: 0x1616
Link: Port1.0.21 disabled
Link: Port1.0.22 disabled
Link: Port1.0.23 disabled
Link: Port1.0.24 disabled
Link: Port1.0.25 disabled