Allied Telesis AT-S79 - Manual (Page 112)

Chapter 10: Virtual LANs
112 Section I: Using the Menus Interface
The Port-Based VLAN Configuration Menu is shown in Figure 26.
Figure 26. Port-Based VLAN Configuration Menu
4. Type A to select Add Member Port.
The following prompt is displayed:
Enter Group ID >
5. Enter a Group ID. Enter a value from 1 to 52. Then press Return.
The following prompt is displayed:
Add Member -> Enter port number ->
6. Enter a port number or a range of port numbers. You can add more
than one port at a time. You can specify the ports individually (for
example, 2,5,11), as a range (for example, 4-7), or both (for example,
2,5,11-15).
7. Type C to select Change VLAN Group Name.
The following prompt is displayed:
Enter Group ID >
8. Enter a Group ID of an existing group. Then press Enter.
The following prompt is displayed:
Enter new VLAN group name >
VLAN Management -> Port-Based VLAN Configuration Menu
Index Group Name Group Member
------- ------------- ---------------------------
3 Sales 3-6
4 Marketing 7,9-11
------------------------- <COMMAND> ----------------------------------
[N]ext Page
[A]dd Member Port [C]hange VLAN Group Name
[P]revious Page [D]elete Member Port [Q]uit to Previous Menu
Command>