Allied Telesis AT-S79 - Manual (Page 283)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 283
Modifying a Tagged VLAN
To modify a tagged VLAN, perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge.
2. From the Bridge folder, select VLAN.
3. From the VLAN folder, select Tagged VLAN.
An Example of a Tagged VLAN page is shown in Figure 80 on page
282.
4. In the VLAN Action column, click modify next to the VLAN that you
want to change.
The Modify VLAN Page is displayed, see Figure 81
Figure 81. Modify VLAN Page
5. To change the VLAN ID, type in a VLAN ID in the VLAN ID field.
You can choose a value between 2 and 4,000.
6. To change the name of the VLAN, type in a name in the VLAN Name
field.
7. To assign ports to the VLAN, click on the port numbers labeled either
Static Tagged or Static Untagged. Then click Apply.