Allied Telesis AT-S79 User Manual
Page 310
Advertising
Chapter 32: Rapid Spanning Tree Protocol (RSTP)
310
Section II: Web Browser Interface
The RSTP Basic Port Configuration page is shown in Figure 90.
Figure 90. RSTP Basic Port Configuration Page
4. In the STP Status column for the port you want to configure, select the
STP status from the list, either Enable or Disable.
5. In the Priority column for the port you want to configure, type a number
for the port priority.
Port priority is described in “Port Priority” on page 158.
6. In the Path Cost column for the port you want to configure, type a
number for the Path Cost.
Path cost is described in “Path Costs and Port Costs” on page 157.
7. Click Apply.
Advertising