Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 100)

Additional Info
Displays additional traffic statistics in the network segment such as frames
received/sent, collisions, broadcast frames and multicast frames.
Error
Displays error statistics in the network segment such as CRC errors, alignment
errors, bad frames received late collisions and total transmit errors.
Note - There may be times when Device Manager will not be able to successfully
retrieve error statistical information. When this happens, all parameters in this table
will display the value "retry over occurred". To prevent this from happening, do the
following:
ƒ Go to File -> Property.
ƒ Click on the Settings button in the Polling Options area.
ƒ Increase the value of the Timeout parameter in the Retry area.
History Control Table
Displays the RMON History table.
Note - The current firmware version does not support RFC1757. As a result, Device
Manager will display the error message "Failed to get MIB data."
Alarm Table
Displays the RMON Alarm table.
Event Table
Displays the RMON Event table.
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays port statistics such as the number of packets received and transmitted on
the port, bytes received and transmitted on the port and port status.
Note - The current firmware version does not support the Specific Media MIB
parameter.
AlliedView™-EMS 4.0.1 Device Management Guide Page 100 of 411