At-8412 – Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT User Manual
Page 94
Advertising
AT-8412
AT-8412/MT
AT-8412/SC
LED
State
Description
DUPLEX
Green
The port is operating in full-duplex.
Note
- The current firmware version does not allow the Port Flow Control parameter of
ports on the AT-8412/MT and AT-8412/SC line cards to be set to 'auto'. Attempting to set
this parameter to 'auto' will result in the error message: "The error occurred with 'Set'
operation. Error: gen Error".
AlliedView™-EMS 4.0.1 Device Management Guide
Page 94 of 411
Advertising