Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT User Manual
Page 81
The AT-8326GB supports up to 6 AT-8326GB stacked switches or any of the following
mixed stack combinations of AT-8326GB and AT-8350GB switches:
•
Two AT-8326GB switches and one AT-8350GB switch
•
Two AT-8326GB switches and two AT-8350GB switches
•
Three AT-8326GB switches and one AT-8350GB switch
•
Four AT-8326GB switches and one AT-8350GB switch
Note
- When 3 or more AT-8326GB devices are stacked together, expect the twisted pair
port image of Port 26 on the last device on the stack to turn green. This is because the
current firmware version returns 'on-line' for the Port Link State parameter of the port
even if there is no link established.
AT-8350GB
The AT-8350GB supports up to 3 stacked AT-8350GB switches.
Note
- The current firmware version does not allow Device Manager to support the RPS
LED.
Note
- The current firmware version does not allow Device Manager to support expansion
modules that may be installed on the AT-8350GB.
Device Manager LEDs for AT-8300GB Series
LED
State
Description
PWR
Green
The switch is receiving power.
STACK ID Green
The switch's position in the switch stack.
AlliedView™-EMS 4.0.1 Device Management Guide
Page 81 of 411