Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 314)

Note - The current firmware version returns a 'noSuchName' value for the Ping
Probe History Table parameters.
Restart Device
Initiates a restart on the switch.
Note - For devices that is set to standalone mode, while the Reset operation is in progress,
error "The error with 'Set' operation. Error: time out occurred." will be displayed and
should be ignored.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
IP
Address Table
Standard
Displays the list of IP interfaces on the switch.
Note - The Re-assemble Max Size parameter is not applicable to the AT-
x900-12X series and should be ignored.
Additional Info
Displays the information of the IP Address of the device.
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Address parameter will display a sequence of bytes
in hexadecimal format instead of the actual IP address of the device.
Note - The current firmware version does not allow the Port Number and
Assignment Type parameters to be configured.
Note - The current firmware version allows the user to enter up to 128
characters for the Label parameter but truncates entered values to 127
characters.
Note - Configuring Prefix Length parameter will result in the error message
"The error occurred with 'Set' operation. Error: time out occurred."
However, the new value is still set successfully.
AlliedView™-EMS 4.0.1 Device Management Guide Page 314 of 411