Allied Telesis AT-S101 - Manual (Page 35)

AT-S101 Management Software User’s Guide
35
4. To enable or disable the web server, do the following:
a. Click the Web Server parameter and choose Enable or Disable
from the pull-down menu. The default is Enable. When you enable
this parameter, you can use a web browser to manage the switch
remotely.
Note
Disabling the web browser automatically ends your remote
management session. If this occurs, press the Reset button to
recycle the power to the switch. Then logon to the switch.
b. Click Apply.
5. From the menu on the left side of the page, select Save Configuration
to Flash to save your changes.