Allied Telesis AT-S80 - Manual (Page 117)

AT-S80 Management Software User’s Guide
Section I: Using the Menus Interface 117
Deleting a Tagged
VLAN
To delete a Tagged VLAN, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 14 on
page 64.
2. From the Advanced Switch Configuration Menu, type V to select VLAN
Management.
The VLAN Management Menu is shown in Figure 21 on page 103.
3. Type V to select 802.1Q VLAN.
The Tagged-based VLAN configuration Menu is shown in Figure 22 on
page 104.
4. Type D to select Delete VLAN.
The following prompt is displayed:
Enter VLAN ID >
5. Type the VLAN ID of the VLAN you want to delete and press Enter.
You can enter only one VID.
The range of the VID is from 2 to 4094.
Note
The VLAN is immediately deleted with no confirmation prompt.
Note
You cannot delete the Default VLAN which has a VID of 1.
The VLAN Management Menu is updated to show that the VLAN is
deleted. The untagged ports of a deleted VLAN are automatically
returned to the Default VLAN.
6. Type Q to select Quit to previous menu and save your changes.