Allied Telesis AT-S62 - Manual (Page 245)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 245
Creating an ACL
This procedure explains how to create an ACL. In order to perform this
procedure, you need to know the ID numbers of the classifiers you want
to assign to the ACL. To view classifier ID numbers, refer to Displaying
Classifiers on page 235.
To create an ACL, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 4 to select Access Control
Lists. The Access Control Lists (ACL) menu is shown in Figure 77.
Figure 77 Access Control Lists (ACL) Menu
3. Type 1 to select Create ACL.
The Create ACL menu is shown in Figure 78.
Figure 78 Create ACL Menu
Allied Telesyn Ethernet Switch AT-8524M - ATS62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Access Control Lists (ACL)
1 - Create ACL
2 - Modify ACL
3 - Destroy ACL
4 - Show ACLs
P - Purge ACLs
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-8524M - ATS62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Create ACL
1 - ACL ID ........... 0
2 - Description .......
3 - Action ............ Deny
4 - Classifier List ...
5 - Port List .........
C - Create ACL
R - Return to Previous Menu
Enter your selection?