Allied Telesis AT-S62 - Manual (Page 329)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 329
Max Shutdown Voltage
The maximum threshold voltage at which the switch shuts down
PoE. If the power supply in the switch experiences a problem and
the output voltage exceeds this value, the switch shuts down PoE
on all ports. This value is not adjustable.
2 - Summary All Ports Status Menu
This selection display an abbreviated status report of PoE on the
individual switch ports. For more detailed information, refer to
selection 3.
This selection displays the following window:
Figure 115 PoE Summary Ports Status Menu
The selections in this window are for viewing purposes only. Each
column is described below.
Port
Port number.
PoE Function
Whether PoE is enabled or disabled on the port. The default
setting is enabled. To enable or disable PoE on a port, refer to
Configuring PoE Port Settings on page 325.
Consumed Power
The amount of power in milliwatts currently consumed by the
powered device connected to the port. If the port is not
connected to a powered device, this value will be 0 (zero).
Allied Telesyn Ethernet Switch AT-8524POE - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
PoE Summary Ports Status
Port PoE Function Consumed Power (mW)Power Status
--------------------------------------------------
1
ENABLED 1,900 ON - Valid PD detected
2 ENABLED 1,900 ON - Valid PD detected
3 ENABLED 1,900 ON - Valid PD detected
4 ENABLED 0 OFF - Detection is in progress
5 ENABLED 0 OFF - Detection is in progress
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?