Allied Telesis AT-8550SP - Manual (Page 55)

AT-8500 Series Fast Ethernet Switch Installation Guide
55
7. Using a Phillips screwdriver, tighten the installation screws found
on the module faceplate, as shown in Figure 15.
Figure 15 Tightening the Module Installation Screws
Caution
Always use the installation screws to secure the module to the
switch. Leaving a module partially seated may cause the system to
halt and subsequently crash.
10/100/1
000B
ASE-T
AT-A46
10
100
FULL DUP
LEX
ACTIVITY
LINK
1000