Allied Telesis AT-S62 User Manual
Page 117
Advertising
AT-S62 User’s Guide
Section I: Basic Operations
117
to the port where the multicast application is located will result in
the failure of the multicast packets to be properly forwarded to
the host nodes. You can specify the ports individually (e.g., 1,4,5),
as a range (e.g., 11-14) or both (e.g., 15-17,22,24).
The following prompt is displayed:
Please enter VLAN ID: [1 to 4094] -> 1
7. Enter the VLAN ID where the port is a member.
8. Repeat this procedure starting with Step 3 to enter additional static
unicast or multicast MAC addresses.
9. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Advertising