Allied Telesis AT-S62 User Manual
Page 625
Advertising
AT-S62 User’s Guide
Section VIII: Web Browser Management
625
the failure of the multicast packets to be properly forwarded to
the host nodes. You can specify the ports individually (e.g., 1,4,5),
as a range (e.g., 11-14) or both (e.g., 15-17,22,24).
6. In the VLAN ID field, enter the VLAN ID where the port is a member.
7. Click Apply.
8. Repeat this procedure to add other static addresses to the switch.
9. To permanently save the change, use the Save Changes button in the
General tab. For directions, refer to Saving Your Parameter Changes
on page 577.
Advertising