Aastra Telecom REV 06 - Manual (Page 121)

Features in Release 2.2
RN-001029-00, Rev 06, Release 2.2 117
5i Series IP Phone Release Notes
Configuring a TFTP or FTP Path Using the IP Phone UI
Use the following procedure to configure a TFTP or FTP path using the IP Phone
UI.
Aastra IP Phone UI
Step Action
Configuring TFTP Path
1 Press Options->Administrator Menu.
2 Enter your Administrator password and press Enter.
3 Select Configuration Server->TFTP Settings->Primary TFTP Path.
4 Enter the enter the path name for which the configuration files reside on the primary TFTP server for
downloading to the IP Phone. To enter the “\” character, press the “#” key several times to cycle
through the characters until you see the “\” character.
Note: Enter the path name in the form folderX\folderX\folderX. For example,
ipphone\57i\configfiles. You can enter up to 64 alphanumeric characters.
For 55i, 57i, and 57i CT:
Press BACKSPACE to delete characters.
Press ABC to toggle between upper and lower case letters.
Press NEXTSPACE to add a blank space.
Press CANCEL to cancel the entry for the TFTP path.
For 51i, and 53i:
Press ENTER to display the Primary TFTP Path screen.
Press NEXT to move to the next option in the TFTP Settings Menu.
Press CANCEL to cancel the entry.
Press SET to save the entry for the TFTP Path.
Primary TFTP Path
iphone\57i\configfiles
- Backspace
Primary TFTP Path
Cancel -
Done - - ABC
Nextspace -
2 Pri TFTP Path
Enter Next
Pri TFTP Path
Set Cancel
iphone\53i\configfiles
55i/57i/57i CT
51i/53i