Aastra Telecom REV 06 - Manual (Page 23)

Features in Release 2.2
RN-001029-00, Rev 06, Release 2.2 19
5i Series IP Phone Release Notes
In previous releases, you could configure one phone number and then select the
current mode (All, Off, Busy, No Answer, Busy No Answer). In Release 2.2, you
can enable different call forwarding rules/modes independently (for example, you
can set different phone numbers for Busy, All, and NoAns modes and then turn
them on/off individually).
The following table describes the key and Message Waiting Indicator (MWI)
LEDs when you enable CFWD on the IP Phone.
You can enable/disable CFWD and set a CFWD key using the configuration files
or the Aastra Web UI. You can set CFWD mode (Account, Phone, Custom)
using the configuration files, Aastra Web UI or IP Phone UI.
Key LED Behavior
for All Modes MWI LED Behavior
for All Modes
CFWD key LED RED if CFWD All, CFWD
Busy, or CFWD No Answer is enabled for
the account in focus.
CFWD key LED OFF if any CFWD mode
is disabled.
MWI LED ON if current account in focus has
CFWD ALL enabled.
MWI LED OFF if CFWD All is disabled.