Aastra Telecom REV 06 - Manual (Page 126)

Features in Release 2.2
122 RN-001029-00, Rev 06, Release 2.2
IP Phone Release Notes 2.2
Configuring SIP and TLS Source Ports Using the Aastra Web UI
Use the following procedure to configure SIP and TLS source ports using the
Aastra Web UI.
.
Aastra Web UI
1 Click on Advanced Settings->Global SIP->Advanced SIP Settings.
.
2 The “Local SIP UDP/TCP Port” field has a default value of 5060. Change this value if required to a
value greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict RTP port range in case of a UDP transport.
“Local SIP UDP/TCP Port” Parameter “Local SIP TLS Port” Parameter