Configuring an ip address and switch name – Allied Telesis AT-S60 User Manual
Page 434
Advertising
AT-S60 Management Software User’s Guide
Section IV: Web Browser Management
433
Configuring an IP Address and Switch Name
This procedure describes the parameters in the Administration section
of the Configuration Menu. Information about the Configuration and
MAC Address Aging Time parameters are discussed later in this guide.
Note
For guidelines on when to assign an IP address, subnet address, and
gateway address to an AT-8400 Series switch, refer to Assigning an
IP Address to a Switch on page 42.
To set the basic switch parameters for an AT-8400 switch, perform the
following procedure:
1. From the Home Page, select Configuration.
Advertising