Allied Telesis AT-S60 - Manual (Page 88)

AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management 87
6. Enter a username. The usernames are “manager” to view and change
the switch settings and “operator” to just view the settings. Press
Return.
A password prompt is displayed.
7. Enter the switch’s password and press Return.
The default password for Manager access on an AT-8400 switch is
“friend.” The default password for Operator access is “operator.”
The passwords are case-sensitive.
The Main Menu of the selected switch is displayed. You now can
manage the switch. Any management tasks you perform effect
only the selected switch.
Note
Option 4 - Download Image/Boot Loader is explained in Chapter 11,
File Downloads and Uploads on page 148.
Returning to
the Master
Switch
When you are finished managing a slave switch and want to manage
another switch in the subnet, return to the Main Menu of the slave
switch. Then type S to save your configuration changes and type Q for
Quit. This returns you to the Stacking Services menu. Once you see that
menu, you are again addressing the Master switch from which you
started the management session.
You can select another switch in the list to manage or, if you want to
manage the Master switch, return to the master switch’s Main Menu by
typing R twice.