Allied Telesis AT-S60 - Manual (Page 94)

AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management 93
Configuring Port Parameters
To configure the parameter settings for a port on the switch, perform the
following procedure:
1. From the Main Menu, type 1 to select Port Menu.
The Port Menu is shown in Figure 25 on page 89.
2. From the Port Menu, type 1 to select Port Configuration.
The following prompt is displayed:
Enter port-list:
3. Enter the number of the port you want to configure and press Return.
See Specifying Ports on page 31.
The Port Configuration menu is shown in Figure 27.
Figure 27 Port Configuration Menu
Note
The sample Port Configuration Menu in the figure above is for a
10/100 Mbps twisted pair port. The menu for a fiber optic port or a
GBIC module contains a subset of the above parameters.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 15-Jan-2003
Port Configuration
Configuring Port 1.3
0 - Port Name ........... Port_1.3
1 - Status .............. Enabled
2 - Broadcast Filter..... Disabled
3 - Override Priority.... No override
4 - HOL Blocking ........ Disabled
5 - Back Pressure ....... Disabled
6 - Flow Control ........ Auto
7 - Negotiation ......... Auto
D - Set Default Port Configuration
R - Return to Previous Menu
Enter your selection?