Asus Pedestal/5U Rackmount Server TS500-E5 - Manual (Page 131)

ASUS TS500-E5 6-27
Using the Objects command
To check data consistency using the Objects command:
1. From the Management Menu, select Objects, then select Logical Drive
from the menu.
2. Use the arrow keys to select the logical drive you want to check, then press
<Enter>.
3. Select Check Consistency from the pop-up menu, then press <Enter>.
4. When prompted, use the arrow keys to select Yes from the dialog box to
check the drive.
5. When checking is complete, press any key to continue.