Asus Pedestal/5U Rackmount Server TS500-E5 - Manual (Page 98)

5-26 Chapter 5: BIOS setup
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Setting this item to [Enabled] allows the computer to power up even when the
Serial Port1/2 Address item in the Onboard Device Configuration menu is
set to [Disabled]. See section 5.4.4 Onboard Device Configuration for details.
Resume On PME [Disabled]
When set to [Enabled], the system enables the PME to generate a wake event
while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
Restore on AC Power Loss [Last State]
Power On By External Modems [Disabled]
Power On by PME [Disabled]
Power On By RTC Alarm [Disabled]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
<Enter> to select
whether or not to
restart the system
after AC power loss
5.6.3 APM Configuration